15 Following
barrerahaslund7

barrerahaslund7

SPOILER ALERT!

Flow Wrapper Troubleshooting

http://zu.tefude.com/zu
http://az.tefude.com/az
http://ceb.tefude.com/ceb

Flow package is now a very common and common packaging method, and also a growing number of clients are buying stream wrapping machine from us.

But because some customers' surgery techniques are erroneous, causing the machine to malfunction, we will list some common leak wrapper troubleshooting here.

Back guarantee folds:



1. The spine seal wrinkle is caused by the mismatch between the speed of the middle seal wheel and the packing rate of the system. There is really a black rotating handle between the two centre seal wheels. It is used to adjust the rate of their central seal wheel. Adjust the rate to the leftside. Slow, turn directly to speed up.
2. If the spinning handle doesn't have effect, the belt could fall as a result of a lot of revolutions. Open the case cover, there's a belt at the text with the handle, check if the belt is lost, and then restore it.
Flow Wrap Machine

Cut products:



1. Item cutting might be caused by inaccurate material level modification, just adjust the material level handle.
2. There may also be difficulties with the merchandise itself, such as for example different shapes and lengths.
3. The speed will be too fast. The speed is too fast, and the end spin rate have not maintained. That means you're able to cut back the packaging rate or boost the end-sealing rate.

End seal encoder failure:



Inch. Click Clear. After emptying, shut down and restart.
2. If the preceding steps still do not work, assess the ending seal encoder at the lower instance, the motor features a belt on it, and see if it is loose. If it is loose, this fault alarm problem often does occur.

When you've got other flow wrapper issue, please contact us for free.